StrongArm® M30/M50
Ultimate stopping power.
Certified and rated HVM barrier arm secures vehicle access points against hostile intent. Proven HySecurity hydraulics and controls provide versatility and long life.
Rating
The power to stop a truck in its tracks, with approximately 1 meter of penetration*
No-Power
StrongArm M30 NP/M50 NP (No-power) models defend high security, low traffic, sites where power isn't required
Models
International certification (CE) models available
Speed
Open access points in as quick as six seconds, reducing traffic backups by minimizing gate open times
- Key locked pivot post covers protect against vandalism, houses hydraulics and controls
- Passenger vehicle arm bumper height protects vehicles from passing underneath upper arm
- Monitored photo eye
- LED arm lighting boosts visibility
- Up to 24 ft (7.3 m) clear opening
Technical Specifications
Featuring steel construction in a corrosion resistant powder coat finish or hot dip galvanized finish, M30/M50 crash-rated barrier arms are available in widths up to 24 feet and provide long-lasting life and security. Available heating and cooling options for extreme environments.
Complete technical specifications can be found on our StrongArm M30/M50 product spec sheet.
Operator |
||||
| Model | StrongArmM30 | StrongArmM50 | StrongArmM30 NP | StrongArmM50 NP |
Performance |
Top | |||
| Rating | ASTM F2656-07 M30-P1* | ASTM F2656-07 M50-P2* | ASTM F2656-07 M30-P1* | ASTM F2656-07 M50-P2* |
| Drive | Hydraulic | |||
| Horsepower | 2 hp | |||
| Duty Cycle | 100 cycles/hr**, option for continuous duty | Manually Operated | ||
| Open/Close Time | 6 to 8 seconds depending on arm length. | Open time: approximately 1 to 3 minutes depending on arm.Close time: approximately 15 to 25 seconds depending on arm. | ||
| Emergency Fast Operate | 5 to 7 seconds depending on arm length | |||
Complete technical specifications can be found on our StrongArm M30/M50 product spec sheet.
Perimeter Security Specification Support
Our dedicated team of Specification Sales Engineers are here with consultation and expertise for your project.
| * | P1 and P2 rated for 12 ft clear opening. StrongArm M30 features an ASTM F2656-07 M30 P1 rating (1m penetration). StrongArm M50 features an ASTM F2656-07 M50 P2 rating (1.2m penetration). Contact HySecurity to receive a copy of the ASTM F2656-07 M30 or M50 Test Certification. | |
| ** | The operator’s normal duty cycle and the actual number of arm cycles available from battery depends upon arm length/weight, battery size, state of charge and health, ambient temperature, accessory power draw and frequency of arm cycles during power outage. ExtremeCycle option available. | |
| *** | 208/230VAC, single-phase AC operators only. See AC Power Supply with HyInverter AC for more information. |